RITES Interview Questions For Freshers And Experienced [Technical & HR]

RITES Interview Questions

RITES Interview Questions

Are you eagerly searching for RITES Interview Questions? Here is the something important information for you. Yes, you are in a right place where you can find plenty of frequently asked interview questions for both freshers and experienced candidates respectively as clearly detailed on this page keep follow. Contenders who are going to participate in RITES Interview should need to take a look at this article carefully until the end to get a good score in Interview. So, we suggest aspirants should do more practice on below mentioned frequently asked interview questions to face the interview without any fear hearted. To learn more updates regarding this article, keep visiting our website All India Jobs regularly. Also, you can bookmark our page to reduce search burden.

RITES Interview Rounds

All the contenders who are applied for RITES Interview should aware of all the fundamental things regarding interview rounds which they are going to interviewing in advance to the interview schedule. They are
  • Online Test
  • Technical Interview
  • HR interview
  • Personal Interview
The aspirants who are qualified in the Online test will be allowed for next interview rounds successfully without any rejection. So, we suggest applicants should keep more concentration on given commonly asked interview questions in order to perform well in Interview. Also, contestants should understand the fact that they will get selected in RITES Interview only after the successful completion of their interview rounds by reaching qualifying mark successfully.

Also Check: RITES Recruitment

RITES Technical Interview Questions For Freshers

Before going to participate in RITES technical interview, it will be very helpful for you to obtain valuable information regarding the bunch of frequently asked Technical Interview questions especially applicable for fresher applicants. So, contenders are advised to keep learning this section keenly without giving any skip.

Networks Interview Questions
  • What is a network?
  • Define LAN, MAN, and WAN?
  • What is TELNET?
  • What is switching?
  • What is a Link?
  • Define pulse code modulation?
  • What is IPv6?
  • What is RSA algorithm?
  • What is mesh topology?
  • What is simplex?
  • What is half-duplex?
  • What is full duplex?
  • What are the advantages of broadcast network.?
  • What do you mean by point to point network?
  • What is the design issue of layers?
  • Define pulse amplitude modulation?
  • Describe Ethernet
  • What are some drawbacks of implementing a ring topology?
  • What is the difference between CSMA/CD and CSMA/CA?
  • What is SMTP?
  • What is multicast routing?
  • What is the importance of Encryption on a network?
  • How are IP addresses arranged and displayed?
  • Explain the importance of authentication.
  • What is a point to point link?
  • What is anonymous FTP?
  • What is subnet mask?
  • What is the maximum length allowed for a UTP cable?
  • What is data encapsulation?
C Language Interview Questions
  • What is C language?
  • Who developed C language?
  • Describe history of C programming language
  • Where is C programming language used or uses of C language?
  • What is the difference between C and C++?
  • What is a keyword in C?
  • What is the difference between top down approach and bottom up approach in programming languages?
  • List out some keywords available in C language.
  • What is the difference between C and Java?
  • C language has been developed in which language?
  • Which year C language is developed?
  • What is meant by programming language and give some examples?
  • Describe C standards?
  • What are the key features or characteristics of C language?
  • What is embedded C?
  • Which level is C language belonging to?
  • What do you mean by high level, middle level, and low-level languages and give an example for each?
  • What is the difference between structured oriented, object oriented and non-structure oriented programming language?
  • What is compiler?
  • What is the difference between assembler, compiler, and interpreter?
  • What is meant by protocol?
  • Execution of a C program starts from which function?
  • What are all the sections that a C program may/must have?
  • What is IDE?
  • List out some of C compilers
  • What is header file in C language?
  • Is C language case sensitive?
  • What is Macro? Why do we use a macro?
  • What is data type in C?
  • What is the difference between int, char, float & double data types?
  • What is the use of the size of() function in C?
  • What is a modifier in C?
  • What are different types of modifiers in C?
  • What is enum in C?

RITES HR Interview Questions For Freshers

The contenders who are attending for RITES HR interview should keep in mind that, the first few minutes of the interview will be decided taking part for the interviewer about the corresponding applicant. So, we suggest contenders should prepare more to get a good impression from the respective interviewer. Below are the frequently asked HR interview questions which you should consider as your study guide during the practice period.
  • How did you hear about the position?
  • Can you tell me a little about yourself?
  • Why do you want this job?
  • What do you know about the company?
  • Describe a situation when you did much more than it was expected from you to get the project done. Were your efforts recognized? By whom and how? How did that make you feel?
  • Tell me about a time when you took ownership of a project. Why did you do this? What was the result of you taking the challenge? What could have happened if you did not take ownership?
  • Think about an instance in which you came up with a project idea which was implemented primarily because of your efforts. What was it about? What was its outcome? What was your role?
  • Why should we hire you?
  • What are your greatest professional strengths?
  • What do you consider to be your weaknesses?
  • Where do you see yourself in five years?

RITES Technical Interview Questions For Experienced

As we cannot predict the exact interview question to be asked in Interview, we tried our best in bringing all the essential data regarding Frequently asked technical interview questions into one section as detailed below. So, we recommended that aspirants should spend some time on given commonly asked interview questions which you can expect a similar way of interview questions for upcoming interview schedule respectively.

Civil Engineer Interview Questions
  • What are the steps involved in the concreting process, explain?
  • Describe briefly the various methods of concrete curing.
  • What do you understand by “preset” during the installation process of bridge bearings?
  • Why are steel plates inserted inside bearings in elastomeric bearings?
  • What reinforcements are used in the process of prestressing?
  • In the design of bridge arguments what considerations should be made to select the orientation of the wing walls?
  • In the case of concrete box girder bridges, how is the number of cells determined?
  • Under what circumstances should pot bearings be used instead of elastomeric bearings?
  • Why should pumping be not used in case of concreting works?
  • Why should curing not be done by pounding and polythene sheets?
  • What is the different type of slump test indications?
  • Why is propping required for long structures once the formwork is removed?
  • Explain the mechanism of cavitations in pipes and drains?
  • For what purpose bedding is used under storm water drains, explain?
  • Why are pull-out tests performed for soil nails?
  • Describe briefly the advantages and disadvantages of using plastic and timber fenders?
Mechanical Engineer Interview Questions
  • Explain the second law of thermodynamics.
  • What are the points in the stress strain curve for steel?
  • What is extruded aluminum?
  • How does iron ore turn into steel?
  • What does Green field project mean?
  • What causes white smoke in two stroke locomotive engines?
  • What does angular momentum mean?
  • What is representative elementary volume?
  • How is martensite structure formed in steel?
  • Where the pneumatic system is used?
  • How pipe flanges are electrically insulated?
  • What are the advantages of gear drive?
  • Why would you use hydraulics rather than pneumatics?
  • What is enthalpy?
  • What is a uniformly distributed load?
  • What is annealing?
  • Explain Otto cycle.
  • What is the alloy of tin and lead?
  • What is the difference between projectile motion and a rocket motion?
  • What kinds of pipes are used for steam lines?
  • What is the difference between the shear center flexural center of twist and elastic center?
  • What is ferrite?
  • What is a cotter joint?
  • What does F.O.F. stand for in the piping design?
  • What is gear ratio?
  • What is ductile-brittle transition temperature?
  • What is a positive displacement pump?
  • What is isometric drawing?
  • Which conducts heat faster steel copper or brass?
  • What is a Process Flow Diagram?
  • Why gas containers are mostly cylindrical in shape?
  • What is an orthographic drawing?
  • Why are LNG pipes curved?
  • Can you use motor oil in a hydraulic system?
  • What is the role of nitrogen in welding?
  • Is it the stress that, produces strain or strain produces stress?
  • What is the mechanical advantage of a double pulley?
  • What is a Newtonian fluid?
Electrical Engineer Interview Questions
  • Why star delta starter is preferred with induction motor?
  • What is the effect of hysteresis loss in transformer/machines?
  • Explain to me some of the projects that you have helped design?
  • What was your role in these projects?
  • State the difference between generator and alternator
  • Why did you choose to go into electrical engineering?
  • What are some of the most common causes of transformer humming?
  • What is the difference between neutral circuit and core balance circuit protection?
  • How do you measure earth resistance?
  • Why AC systems are preferred over DC systems?
  • State the methods of improving power factor?
  • How can you relate power engineering with electrical engineering?
  • Explain different losses in a transformer.
  • What are the various kinds of cables used for transmission?
  • Why back emf used for a dc motor? highlight its significance.
  • What is a slip in an induction motor?
  • Explain the application of storage batteries.
  • Why AC systems are preferred over DC systems?
  • State Thevenin’s Theorem:
  • How do you connect the basic elements of an integrated circuit?
  • What quality checks did you use to test your projects?
  • What transistor level design tools are you familiar with?
  • What is the output power equation for solar cells?
  • Where do you hope your career takes you within the field?
  • What are some of the basic ways of determining voltage standing in a transmission line?
  • State Maximum power transfer theorem
  • What is the difference between a single pole and a double pole?
  • What are the types of power in electrical power?
  • Why use the vcb at high transmission system ? why cant use ACB?
  • State Norton’s Theorem
  • What is a 2 phase motor?
  • Explain advantages of storage batteries
  • What is ACSR cable and where we use it?
  • What are the most important data on the motor nameplate?
  • State the difference between generator and alternator
  • What are the various kinds of cables used for transmission?

RITES HR Interview Questions For Experienced

Here are some of the frequently asked HR interview questions which are likely to be asked in RITES HR interview for experienced candidates. So, contenders are advised to work hard on below-mentioned interview questions carefully without leaving a single question. As it is part of selection process, aspirants needed to put more concentration during preparation time to get a sure shot result in HR Interview successfully.
  • If I spoke to your last boss, how would they describe your work style?
  • What are your strengths and weaknesses?
  • Describe your ideal working environment.
  • What are your goals, both short and long term?
  • Why did you leave (or why are you leaving) your job?
  • How would you describe yourself?
  • Tell me about your previous work experience.
  • How do you define success?
  • What motivates you to succeed or do your best?
  • What, do you feel, separates you from other candidates?
  • What qualities do you have that would be helpful on this job?
  • Is there anything important that you haven’t had a chance to tell me about?
  • What salary are you seeking?
Hope you got an idea about RITES Interview questions from this article. If you have any issues with this article, feel free to share with us through mail. We will always ready to help you as early as possible.

Leave a Reply

Your email address will not be published. Required fields are marked *

Nature's Inspiration

Quote of the day!


Knowing is not enough; we must apply.
Wishing is not enough; we must do.

All rights reserved. Privacy Policy Privacy Policy