Eicher Motors Interview Questions [Technical & HR] For Freshers And Experienced Candidates

Eicher Motors Interview Questions

Eicher Motors Interview Questions


In this article, we have provided most popular interview questions which are frequently asked in Eicher Motors Interview. This page covers both technical interview questions and HR interview questions for various job roles in Eicher Motors Company. As everyone wants to build their career in Eicher Motors, there will be a huge competition for all the applied and eligible candidates. So, to break the barrier for success contenders are suggested to follow this section keenly until the end without any delay.

Also You Can Check: Eicher Motors Recruitment

Eicher Motors Limited (EML) is an Indian automaker company based in Gudgeon, India. It owns Royal Enfield. Eicher Motors is a commercial vehicle manufacturer in India. For more details, keep reading this article carefully without any late.

Eicher Motors Interview Rounds

In Eicher Motors, the selection process comprises of mainly three to four interview rounds as detailed below
  • Online Test
  • Technical Interview
  • HR interview
  • Personal Interview
From the above-mentioned details, it is clear that the recruitment process is same for all the contenders irrespective of their prior experiences. So, the applicants who are applied and eligible for Eicher Motor Interview should be prepared well in every keen aspect of interview questions, interview rounds etc to withstand that bulk competition. To crack each and every interview round with a successful participation, you need to develop skills regarding these frequently asked interview questions along with excellent communication skills as well.

Eicher Motors Technical Interview Questions For Freshers

For a Technical interview, you have to focus on basics of core topics. Here in this section, we are providing some of the important core topic related interview questions which are frequently asked in an Eicher Motors Technical Interview especially for fresher applicants.

Control systems Interview Questions
  • What are the types of alternators?
  • Which among the following controls the speed of D.Cmotor?
  • What should be the nature of bandwidth for a good control system?
  • Which system exhibits the initiation of corrective action only after the output gets affected?
  • What is the secondary side frequency of transformer?
  • What are the various types of the transformer?
  • What are the methods of speed control of dc motors?
  • What do you mean by transformation coefficient?
  • What is the difference between two winding transformers and autotransformer?
  • Why transformers and alternators are rated with kVA?
  • What is the operating power factor of dc machine?
  • What is the value of steady state error in closed loop control systems?
  • What is the difference between MI and MC type instruments?
  • How are MI meters used for measuring both ac and dc quantities?
  • Name the different types of DC and AC starters.
  • What is back emf? Give its significance.
  • What is the difference between self-excited and separately excited machines?
  • Name the types of self-excited dc machine.
  • Give the applications of each type of dc motor and dc generator.
  • What are the losses in dc machine?
  • How is the eddy current loss minimized in dc machine?
  • Name the parts of dc machine.
  • Why shouldn’t dc series motor started at no load?
  • Define transformer.
  • What is meant by power factor? Explain.
  • What do you mean by complex power?
Measurements and Instruments Interview Questions
  • Explain the difference between the measured value & true value in any device?
  • A signal generator that generates known & controllable voltages is known as?
  • What is Instrumentation Measurement?
  • What is the Duty cycle of a square wave generator?
  • What is Instrumentation Control?
  • Which type of wire should be used To increase Q factor of a coil?
  • In a thermocouple temperature transducer, the output voltage is usually measured by?
  • Induction wattmeter can be used in?
  • A moving iron instrument gives a correct reading when used at?
  • Loss of charge method is suitable for medium resistances: True or False?
  • For a time varying input the quality of indication by the instrument is referred as?
  • What are Instrumentation technologists and mechanics?
  • The duty cycle of a pulse generator varies between?
  • What is Instrumentation engineering?
  • In a strain measuring device using a strain gauge, the output quantity is?
  • In which of the transformer is the secondary nearly short circuited under normal operating conditions?
  • Do you know How D.P. transmitter can be applied to close tank?
  • Which range of voltmeters would you use for measuring the voltage across 20 kΩ resistance?
  • What is the angle δ for a mica capacitor?
  • Tell me the working of an enraf level gauge?
  • The household energy meter is?
  • Define Magnetic flux density?
  • What is constant voltage unit?
  • What do you mean by impulse voltage?
  • Define protection and metering?
  • Can you explain burnout feature?
  • A dynamometer watt meter is connected in a circuit. The reading will be?
  • The speed transducer using a drag cup rotor has the main advantage of?
  • A voltmeter using thermocouples measures?
  • What is remote mount with MTA option?

Eicher Motors HR Interview Questions For Freshers

This is the place where you can find many of the HR interview questions, especially for fresher applicants. It will be very helpful to read this section which comprised of various commonly asked HR interview questions during the Eicher Motors Interview. So, contenders are suggested to take a look at these interview questions at least once during practice period to get a good score in Eicher Motors HR interview.
  • Why do you want to work in this industry?
  • How would you describe the corporate culture?
  • What kind of person are you? Describe your personality.
  • If we hire you, and then another company will offer you more money – what will you do?
  • Have you ever been asked to leave a position?
  • Would you lie for the company?
  • Looking back, what would you do differently in your life?
  • Why aren’t you earning more money at this stage of your career?
  • What changes would you make if you came on board?
  • How could you have improved your career progress?
  • What have you done to improve your knowledge in the last year?
  • Do you have any blind spots?
  • What has been your biggest professional disappointment?
  • How do you propose to compensate for your lack of experience?
  • What is more important to you the money or the work?
  • Are you willing to work overtime? Nights? Weekends?
  • What have you learned from mistakes on the job?
  • If you had enough money to retire right now, would you?
  • What kind of person would you refuse to work with?
  • What is your ideal working environment?
  • Why do you think you are smart.

Eicher Motors Technical Interview Questions For Experienced

This is a part of interview rounds which are conducted to shortlist the candidates for the selection process. So, applicants should be needed to put more concentration on frequently asked technical interview questions to get shortlisted in this round instead of getting rejected. Also, contenders can check this section whenever they want by bookmarking this page which reduces search burden.

Electrical Engineer Interview Questions
  • Why star delta starter is preferred with induction motor?
  • What is the effect of hysteresis loss in transformer/machines?
  • Explain to me some of the projects that you have helped design?
  • What was your role in these projects?
  • State the difference between generator and alternator
  • Why did you choose to go into electrical engineering?
  • What are some of the most common causes of transformer humming?
  • What is the difference between neutral circuit and core balance circuit protection?
  • How do you measure earth resistance?
  • Why AC systems are preferred over DC systems?
  • State the methods of improving power factor?
  • How can you relate power engineering with electrical engineering?
  • Explain different losses in a transformer.
  • What is the various kind of cables used for transmission?
  • Why back emf used for a dc motor? highlight its significance.
  • What is a slip in an induction motor?
  • Explain the application of storage batteries.
  • Why AC systems are preferred over DC systems?
  • State Thevenin’s Theorem:
  • How do you connect the basic elements of an integrated circuit?
  • What quality checks did you use to test your projects?
  • What transistor level design tools are you familiar with?
  • What is the output power equation for solar cells?
  • Where do you hope your career takes you within the field?
  • What are some of the basic ways of determining voltage standing in a transmission line?
  • State Maximum power transfer theorem
  • What are the types of power in electrical power?
  • Why use the vcb at high transmission system ? why can’t use ACB?
  • State Norton’s Theorem
  • What is a 2 phase motor?
  • Explain advantages of storage batteries
  • What is ACSR cable and where we use it?
  • What are the most important data on the motor nameplate?
  • State the difference between generator and alternator
  • What is the various kind of cables used for transmission?
  • Mention the disadvantages of low power factor? How can it be improved?
Embedded Systems Engineer Interview Questions
  • What are static variables?
  • What are volatile variables?
  • What do you mean by const keyword?
  • What is interrupt latency?
  • How you can optimize it?
  • What is the size of the character, integer, integer pointer, character pointer?
  • What is a NULL pointer and what is its use?
  • What is ISR?
  • What is the return type of ISR?
  • Can we use any function inside ISR?
  • Can we use printf inside ISR?
  • Can we put a break point inside ISR?
  • How to decide whether given processor is using little endian format or big endian format?
  • What is Top half & bottom half of a kernel?
  • A difference between RISC and CISC processor.
  • What is RTOS?
  • What is the difference between hard real-time and soft real-time OS?
  • What type of schedule is there in RTOS?
  • What is priority inversion?
  • What is priority inheritance?
  • How many types of IPC mechanism you know?
  • What is semaphore?
  • What is a void pointer and what is its use?
  • What is a spin lock?
  • What is the difference between binary semaphore and mutex?
  • What is a virtual memory?
  • What is kernel paging?
  • Can structures be passed to the functions by value?
  • Why cannot arrays be passed by values to functions?
  • How is generic list manipulation function written which accepts elements of any kind?
  • What is the difference between embedded systems and the system in which RTOS is running?
  • How can you define a structure with bit field members?
  • Which parameters decide the size of data type for a processor?
  • What is the job of the preprocessor, compiler, assembler, and linker?
  • What is the difference between static linking and dynamic linking?
  • How to implement a WD timer in software?
Maintenance Engineer Interview Questions
  • Describe two or three major trends in your Maintenance field? Did you choose your job for this Maintenance field?
  • What tertiary qualifications have you attained that related to Maintenance position?
  • What have you done to improve your Maintenance knowledge in the last year? What have you learned from mistakes on the Maintenance job?
  • Are you aware of the major job functions of maintenance?
  • Do you have the knowledge about necessary mechanical equipment, machinery, and maintenance procedures?
  • What maintenance work do you think you can perform better?
  • Name any five maintenance tools have you had good experience in using? Occasionally, most of us have had to make quick decisions tell me about some of your quick decisions as a Maintenance Technician.
  • What problems did you run into in switching departments in your previous work history? What did you do as a Maintenance Technician to correct the problem?
  • How do you monitor the status of orders that you’ve placed for materials or supplies? Give some examples.
  • Do you feel, you require some maintenance training, or you need to attend some maintenance workshop to work with us?
  • How to maintain Maintenance activities?
  • What are common risks for Maintenance? And how to face? Describe steps to manage Maintenance?
  • How to measure the performance of Maintenance activities?
  • What problems did you run into in switching departments in your previous work history? What did you do as a Maintenance Technician to correct the problem?
  • How do you monitor the status of orders that you’ve placed for materials or supplies? Give some examples.
  • Do you feel, you require some maintenance training, or you need to attend some maintenance workshop to work with us?
  • How to maintain Maintenance activities?
  • What are common risks for Maintenance? And how to face? Describe steps to manage Maintenance?
  • How to measure the performance of Maintenance activities?
  • What is the most recent skill you have learned that related to Maintenance?
  • Please explain the various precaution measures used to avoid the accidents and health hazards in the mechanical industry.
  • We are looking for someone with strong leadership skills in this Hospitality role describes the work habits of your employees and tell me your long-term goals for each what action have you taken as a Maintenance Technician to help them meet these goals?

Eicher Motors HR Interview Questions For Experienced

In this section, we are providing frequently asked HR interview questions which are commonly asked in the first few minutes of the interview. So, the impression you make in first minutes of the interview through your answers is going to play a huge factor for entire interview session to become first on the list. Contenders are advised to utilize this one stop destiny like commonly asked interview questions to get a sure shot result in Eicher Motors HR Interview.
  • Give us details of your present employment status
  • What are your strength and explain each
  • I see, there’s some gap in your work history. Why?
  • Can you tell us something about your previous boss?
  • Aren’t you overqualified for this position?
  • Describe your ideal company, location, and job.
  • Why have you been out of work so long?
  • Can you work under pressure?
  • Tell me honestly about the strong points and weak points of your boss 
  • What good books have you read lately?
  • Tell me about a situation when your work was criticized.
  • Could you have done better in your last job?
  • What irritates you about co-workers?
  • What qualities would you look for in your senior?
  • Have you ever committed a mistake at work?
  • What are the most important things for you as a manager?
  • Who has inspired you in your life and why?
  • What was the toughest decision you ever had to make?
  • Tell me about the most boring job you’ve ever had.
  • Have you been absent from work more than a few days in any previous position?
  • I’m concerned that you don’t have as much experience as we’d like in…
  • How do you feel about working nights and weekends?
Hope you got an idea regarding Eicher Motors Interview Questions from this article. Still, if you have any confusion, feel free to drop an email. We will respond as soon as possible and bookmark this page All India Jobs for more updates.

Leave a Reply

Your email address will not be published. Required fields are marked *

Nature's Inspiration

Quote of the day!

__________________

Knowing is not enough; we must apply.
Wishing is not enough; we must do.

All rights reserved. Privacy Policy Privacy Policy