JSW Steel Interview Questions [Technical & HR] For Freshers And Experienced

JSW Steel Interview Questions

JSW Steel Interview Questions

Are you a JSW Steel Interview questions enthusiast? Here is the good news for you. We are provided something important information for you regarding JSW Steel Interview Questions. 

JSW Steel is one of India’s leading integrated steel manufacturers with a capacity of 18 MTPA. It is one of the fastest growing companies in India with a footprint in over 140 countries. JSW Steel is an Indian steel company owned by the JSW Group based in Mumbai, Maharashtra, India. JSW Steel, after the merger of ISPAT steel, has become India’s second largest private sector steel company.

Contenders who are going to participate in an interview process should read the entire content in this page without leaving single word for getting a better understanding on interview questions asked in JSW Steel Interview. So, we suggest aspirants should follow this article till the end for getting a good score in every single interview round conducted by the JSW Steel authority.

Also check: JSW Steel Recruitment

JSW Steel Interview Rounds

The aspirants who are wished to pursue their career in JSW Steel Ltd. Should aware of all the essential basic fundamental regarding the interview process of the corresponding company to score an efficient output during all the interview rounds successfully. The main interview rounds are detailed as follows


  • Online Test/Written Test (Aptitude and Reasoning)
  • Group Discussion (based on candidates pool)
  • Technical Interview and 
  • HR interview.


From the above section, it is very clear that the contenders should attend all the interview rounds and clear them successfully in order to get placement in JSW Steel Ltd. So, contenders are advised to go through this article carefully to become a good performer among all the other applicants in interview time.



JSW Steel Technical Interview Questions For Freshers

The technical interview round will be very simple to clear if the respective interviewee is technically sound. To boost up your core skills and answering way; we are presenting some useful technical interview questions in this section which are commonly asked in JSW Steel interview especially for fresher candidates.

Electrical Machines Interview Questions
  • How are alternators classified?
  • State double revolving field theory
  • What is meant by armature reaction in Alternators?
  • Name the types of Alternator based on their rotor construction
  • Upon what factors does the load angle depend?Why do cylindrical Alternators operate with steam turbines?
  • Define the term voltage regulation of the Alternator Which type of Synchronous generators are used in Hydro-electric plants and why?
  • What is the necessity for predetermination of voltage regulation?
  • Why is the stator core of Alternator laminated?
  • In what way does the ampere-turn method differ from synchronous impedance
  • method?
  • How does electrical degree differ from the mechanical degree?
  • What is distributed winding?
  • State the condition to be satisfied before connecting two alternators in parallel
  • What are the advantages and disadvantages of three dark lamps method of
  • synchronizing?
  • Why is short pitch winding preferred over full-pitch winding?
  • What are the causes of changes in voltage in Alternators when loaded?
  • List the factors that affect the load sharing in parallel operating generators?
  • How does the change in prime mover input affect the load sharing?What is meant by infinite bus-bars?What are the inherent characteristics of plain 1-phase Induction motor?
  • State the advantages of skewing?
  • An induction motor is generally analogous to?
  • What is meant by synchronous watt?


Digital Signal Processing Interview Questions
  • Explain the difference between convolution and correlation.
  • Why do we need Fourier transform in DSP?
  • Explain Interpolation and decimation and their applications in Digital Signal Processing. 
  • Why is the need of FFT?
  • What is the need of Digital Signal Processing?
  • Explain handling of interrupts in DSP? 
  • Explain 8085 Microprocessor Architecture.
  • Explain DSP basic architecture. Mention how to select DSP architecture suitable for algorithm under development.
  • what is the use of random signals?
  • Explain how DSP chip can be interfaced with FPGA chip?
  • Tell some thing about Interpolation and decimation?
  • Mention FIR filter and IIR filter basics and differentiate FIR and IIR filter concepts.
  • what are the characteristics of a transient response of a system?
  • Explain Harvard and Von Neumann architecture and mention difference between them. 
  • whats sampling theorem? who proposed it? whats importance? 
  • What is the application for Cross correlation and Auto Correlation?
  • What is aliasing and how do we prevent it?
  • what do u mean by spectral resolution?
  • Why should we go for digital signal processing where as the most of the real world data is in analog mode?
  • What is Gibbs phenomenon?
  • If a have two vectors, how will I check the orthogonality of those vectors?
  • what care should be taken when we doing cumulative decimation?


JSW Steel HR Interview Questions For Freshers

The HR interview questions are non-technical oriented. We cannot expect exact interview question to be asked but we can predict the possible interview questions by referring frequently asked HR interview questions as given below. So, my dear aspirants use this availability of various interview questions for the purpose of a practice session before approaching the JSW Steel HR Interview.

  • What can you tell me about yourself?
  • Can you list your strengths?
  • What weaknesses do you have?
  • Why should I consider hiring you?
  • What motivates you?
  • What makes a good team player?
  • Is there anything that you would like to ask me?
  • Where do you see yourself five years from now?
  • Why do you want to work here?
  • What is your salary expectation?
  • Why do you want to work in this industry?
  • Why should I hire you?
  • Tell me about a time you didn’t perform to your capabilities.
  • What’s your greatest achievement to date?
  • What is your biggest weakness?
  • Why weren’t your grades better
  • Why didn’t you participate more in extracurricular activities?


JSW Steel Technical Interview Questions For Experienced

The technical interview round contains majorly core subject related interview questions. So, the aspirants who are going to participate in JSW steel technical interview should take care during preparation time as there is a huge competition ahead. Also, the applicants are advised to include this section into their preparation schedules for gaining best score in an interview.

Network Engineer Interview Questions
  • Define pulse code modulation?
  • What is RSA algorithm?
  • What is mesh topology?
  • What is simplex?
  • What is half-duplex?
  • What do you mean by point to point network?
  • What is the design issue of layers?
  • Define pulse amplitude modulation?
  • Describe Ethernet
  • What are some drawbacks of implementing a ring topology?
  • What is the difference between CSMA/CD and CSMA/CA?
  • What is full duplex?
  • What are the advantages of broadcast network.?
  • What is SMTP?
  • What is multicast routing?
  • What is the importance of Encryption on a network?
  • What is VPN?
  • Briefly describe NAT?
  • What is the job of the Network Layer under the OSI reference model?
  • How does a network topology affect your decision in setting up a network?
  • How are IP addresses arranged and displayed?
  • Explain the importance of authentication.
  • What do mean by tunnel mode?
  • What are the different technologies involved in establishing WAN links?
  • What is DHCP?
  • What is the main job of the ARP?
  • What is TCP/IP?
  • How can you manage a network using a router?
  • What is a point to point link?
  • What is anonymous FTP?
  • What is subnet mask?
  • What is the maximum length allowed for a UTP cable?
  • What is data encapsulation?
  • Describe Network Topology


Business Analyst Interview Questions
  • Can you define a Business Analyst? 
  • What are some of the challenges you have faced as a Business Analyst
  • How do you gather requirements from the client? 
  • What Part of Your Job Do you like The Most?
  • How do you show leadership without having authority?
  • Are you aware of the various software methodologies? Name a few
  • What are the various testing stages in a software project life cycle?
  • What are the documentations which you have completed in your experience? Explain in detail.
  • What are the essential duties of a Business Analyst?
  • What is UML?
  • What do you think are your strengths as a Business Analyst?
  • What are nonfunctional requirements?
  • What do you think are your weaknesses as a Business Analyst?
  • What is mean by logical data model?
  • What can you do for us that other prospective candidates cannot?
  • What do u mean by high level & low-level use case?
  • what are your goals as a Business Analyst?
  • What do you know about SDD?
  • What is the motivating factor which you expect from your role as a Business Analyst?
  • What do understand by URS & FS?
  • How is use case prepared?
  • What Part Of Your Job Do You Dislike The Most?
  • How do you participate in testing as a BA?
  • What is the main quality of a good requirement?
  • Describe the meaning of the term data mapping.
  • Has there been a time you disagreed with a decision at work? Tell me about it.
  • Describe the term black box testing.
  • Briefly explain the use case model.
  • What is your typical approach to a project?


Mechanical Engineer Interview Questions
  • Explain the second law of thermodynamics.
  • What are the points in the stress strain curve for steel?
  • What is extruded aluminum?
  • What is a Process Flow Diagram?
  • Why gas containers are mostly cylindrical in shape?
  • What is an orthographic drawing?
  • Why are LNG pipes curved?
  • Can you use motor oil in a hydraulic system?
  • What is the role of nitrogen in welding?
  • How does iron ore turn into steel?
  • What does Green field project mean?
  • What causes white smoke in two stroke locomotive engines?
  • What does angular momentum mean?
  • What is representative elementary volume?
  • How is martensite structure formed in steel?
  • Where the pneumatic system is used?
  • How pipe flanges are electrically insulated?
  • What are the advantages of gear drive?
  • Why would you use hydraulics rather than pneumatics?
  • What is enthalpy?
  • What is a uniformly distributed load?
  • What is annealing?
  • Explain Otto cycle.
  • What is the alloy of tin and lead?
  • What is the difference between projectile motion and a rocket motion?
  • What kinds of pipes are used for steam lines?
  • What is the difference between the shear center flexural center of twist and elastic center?
  • What is ferrite?
  • What is a cotter joint?
  • What does F.O.F. stand for in the piping design?
  • What is gear ratio?
  • What is ductile-brittle transition temperature?
  • What is a positive displacement pump?
  • What is isometric drawing?
  • Which conducts heat faster steel copper or brass?
  • Is it the stress that, produces strain or strain produces stress?
  • What is the mechanical advantage of a double pulley?
  • What is a Newtonian fluid?


JSW Steel HR Interview Questions For Experienced

Here are providing very popular and most frequently asked HR interview questions in this section. So, interested and eligible candidates should work hard on below mentioned commonly asked interview questions to get a sure shot result in the HR interview round.

  • I see, there’s some gap in your work history. Why?
  • Can you tell us something about your previous boss?
  • What is your style of management?
  • What irritates you about co-workers?
  • What qualities would you look for in your senior?
  • Have you ever committed a mistake at work?
  • Is there anything that you do not like about your last or current job?
  • How long can you commit to working with us?
  • What is your expected salary?
  • Tell us something about yourself.
  • Why do you want to leave your present job or company?
  • What do you know about us?
  • Are you comfortable working in a team?
  • What do you do to improve your knowledge?
  • Can you perform under pressure?
  • How would you compensate for the lack of experience you have for this position?
  • Do you know anyone who works for us?
  • What are the most important things for you as a manager?
Hope you got enough information about JSW Steel Interview Questions. If you have any issues with this post leave a message on our website through comment box. We will respond as early as possible. Keep visiting All India Jobs for regular updates on Interview Questions.

Leave a Reply

Your email address will not be published. Required fields are marked *

Nature's Inspiration

Quote of the day!

__________________

Knowing is not enough; we must apply.
Wishing is not enough; we must do.

All rights reserved. Privacy Policy Privacy Policy