TSPSC AEE Syllabus 2017-2018 | Assistant Executive Engineer Civil Exam Pattern

TSPSC Assistant Executive Engineer Syllabus

TSPSC AEE Syllabus 2017-2018 and Assistant Executive Engineering Civil Exam Pattern are available in this section. To prepare for the TSPSC AEE written examination, aspirants can check TSPSC Assistant Executive Engineer Syllabus 2017-2018 through this post. Candidates who are looking for Telangana government jobs they can grab this opportunity. TSPSC AEE Civil Syllabus will be helpful for the contenders during their preparation for the TSPSC AEE Recruitment Process. So follow the given syllabus and Exam pattern in order to crack the written test. 


TSPSC AEE Syllabus 2017-2018 Details

Organization NameTelangana State Public Service Commission
Post Name(s)Assistant Executive Engineer Civil
Number of Vacancies277 Vacancies
Start Date24th November 2017
Last Date16th December 2017
CategorySyllabus
Websitewww.tspsc.gov.in


You can also check
TSPSC AEE Previous Papers
TSPSC AEE Recruitment 2017
Government Jobs In Telangana
TSPSC Jobs

The aspirants who are interested in working under TSPSC it is the excellent chance for those candidates to build their career in the TSPSC AEE Recruitment 2017. The Board will start to receive the online application forms on 24th November 2017 and the last date for receiving the forms is 16th December 2017Therefore the contenders can go through the official recruitment notification and check all the details about eligibility criteria, Date of the exam etc. After verifying all the conditions in the notification, the candidates who are eligible and interested can apply for the Assistant Executive post through online mode on or before the closing date.


TSPSC Assistant Executive Engineer Syllabus 2017-2018


Preparing along with TSPSC AEE Syllabus 2017-2018 and Previous Papers will be easy rather than preparing randomly by which there is scope to miss out some important Topics. In this post, Applicants can also check the Exam pattern of TSPSC Assistant Executive Engineer Civil along with the TSPSC AEE Civil Syllabus which is updated below in this post. The syllabus consists of General Studies and general abilities and Some Technical topics so we advise the candidates to start their preparation early to avoid the time constraint.

Telangana State Public Service Commission has issued an official notification to fill 277 Assistant Executive Engineer Civil posts. The TSPSC is decided to conduct the written exam for the candidates who would apply for the position of Assistant Executive Engineer. Applicants have to start their preparation for the written exam of Assistant Executive Engineer by checking the Syllabus and Exam Pattern which are provided in this article. 

TSPSC Assistant Executive Engineer Exam Pattern 2017

The TSPSC Written test consists of Multiple Choice Questions. The total exam contains 300 questions for 450 Marks. Preparing according to the Syllabus, Exam Pattern and Solved Previous Papers candidates can crack the exam easily.

Sl.No Type of the Exam Papers Number of Questions Maximum Marks
1 Objective Type Paper I - General Studies And General Abilities 150 150
2 Paper II - Civil Engineering (degree level) 150 300
3                    Total 300 Questions 450 Marks

TSPSC AEE Selection Process

The selection of the candidates is purely based on the following steps:
  • Written Exam
  • Personal Interview

TSPSC AEE Civil Syllabus 2017

Paper-I: General Studies and General Abilities
  1. Current Affairs – Regional, National, and International.
  2. International Affairs.
  3. General Science; India’s Achievements in Science and Technology.
  4. Environmental issues; Disaster Management - Prevention and Mitigation Strategies.
  5. Economic and Social Development of India and Telangana.
  6. Physical, Social and Economic Geography of India.
  7. Physical, Social and Economic Geography and Demography of Telangana.
  8. Socio-economic, Political and Cultural History of Modern India with special emphasis on
  9. Indian National Movement.
  10. Socio-economic, Political and Cultural History of Telangana with special emphasis on
  11. Telangana Statehood Movement and formation of Telangana state.
  12. Indian Constitution; Indian Political System; Governance and Public Policy.
  13. Social Exclusion; Rights issues such as Gender, Caste, Tribe, Disability etc. and
  14. inclusive policies.
  15. Society, Culture, Heritage, Literature of Telangana.
  16. Policies of Telangana State.
  17. Logical Reasoning; Analytical Ability and Data Interpretation.
  18. Basic English. (10th Class Standard).
Paper-II: Civil Engineering (Degree Level)

1. Building Materials And Construction:  Bricks– Types of Bricks, Indian standard classification, properties; Stones – Types of stones, classification, properties, dressing and polishing of stones; Methods of Quarrying; Cement – Different grades and types of cement, properties and IS specifications; Aggregates – coarse and fine aggregate, properties and IS specifications; Cement Mortar – Proportions of cement mortar for various applications; Concrete – Constituents of Concrete, Different grades of Concrete, mix proportioning using IS Code, Properties of fresh and hardened Concrete; Admixtures – Types of Admixtures.


2. Strength of Materials And Theory of Structures: Strength of Materials: Simple stresses and strains, elastic constants and relationship between them; Compound bars; Temperature stresses; Shear forces and bending moment diagrams for beams; Principal stresses and Mohr’s circle of stress, Theory of bending and bending stresses ; Shear stress distribution; Theory of torsion; Springs; Deflections of beams; Thin and thick cylinders;; Analysis of trusses, Betti-Maxwell theorem; Shear centre and unsymmetrical bending. Theory of Structures: Direct and bending stresses; Columns and struts; Strain energy method; Moving loads and influence lines; Arches and suspension bridges; Static and kinematic indeterminacy; Moment distribution, Slope deflection, and Kani’s methods applied to continuous beams and portal frames; Column analogy and matrix methods of

analysis.

3. RCC and Steel Structures: Concrete Structures: Materials, permissible stresses and IS Specifications; Working stress methods; Limit State Method - Stress Blocks parameters, design of Beams, Slabs, Columns and Footing; Design for Shear and Torsion; Design of Retaining Walls, Water tanks, and T-Beam Slab bridges; Yield line theory. Steel Structures: Properties of steel sections, permissible stresses, IS Specifications; Riveted and welded joints and connections; Design of simple and compound Beams and Columns, Column bases, Roof trusses, Plate and Gantry Girders; Plate Girder Lattice Girder Railway bridges, and Bearings. Plastic analysis. Pre-Stressed Concrete: Basic concepts, material for pre-stressing, losses in Pre-stress, classification of pre-stressing system; Analysis of PSC Sections.


4. Fluid Mechanics and Hydraulics: Fluid Properties; Measurement of Pressure - Manometers; Fluid Kinematics – Classification of Fluids, Stream function and Velocity potential, significance and use of Flownets, Fluid dynamics - Continuity equation, Bernoulli’s equations and Impulse momentum equation; Laminar and Turbulent flow through pipes – significance of Reynolds number, Hagen – Poiseuille’s equation, Darcy – Weisbach equation, Friction factor, Water hammer phenomenon; Compressible flow – Bernoulli’s equation for Isothermal and Adiabatic conditions, Mach Number, Mach cone, stagnation properties; Steady uniform flow through open channels; Gradually varied flows – significance of Froude number, classification and computation of Flow profiles, Hydraulic jump, Surges; Boundary layer – Laminar and Turbulent Boundary layer, Boundary layer thickness, rough and smooth Boundaries, Boundary layer separation; Dimensional analysis and similarity laws; Hydraulic Turbines – classification, Velocity triangles, principles and design of reaction and impulse turbines; Centrifugal pumps – specific speed, work done and efficiency, characteristic curves.


5. Hydrology and Water Resources Engineering:  Hydrological cycle; Rainfall – types and measurement, network design; Infiltration - ?- index; Runoff – process, factors and determination of runoff, dependable yield; Floods – flood hydrograph, computation of flood peak using rational formula, unit hydrograph method and Gumbel’s extreme value methods; Groundwater – types of aquifer and properties, Darcy’s law, specific yield, steady radial flow to wells in confined and unconfined aquifers; Irrigation – types and advantages, soil water plant relationship, consumptive use, duty, delta, base period, crops and their water requirements; Single and multipurpose projects; Dams – classification, forces and design of Gravity dam and Earth dam; Spillways – types, energy dissipation, stilling basin, Appurtenances; Canals – alignment, Kennedy’s and Lacey’s theories, lining of Canals; Weirs – components, design of vertical drop and sloping glacis weir; Seepage forces – Bligh’s Theory, Khosla’s theory; Canal falls – types and design principles; Cross drainage works – classification and design principles of aqueducts; Hydropower – classification and principle components of Hydroelectric power plants.


6. Environmental Engineering: Water supply – objectives, rate of demand, population forecasts; Analysis of water – classification, design of coagulation, sedimentation, filtration, disinfection and softening processes; Methods of layout of distribution pipes – Hardy cross method; Waste water engineering – systems of sewerage, hydraulic formulae and design of sewers, BOD, COD, self purification of natural streams, methods of sewage disposal; Treatment of sewage – principles and design of grit chamber, sedimentation tanks, trickling filters, activated sludge process, sludge digestion tanks, septic tanks; Municipal solid waste – characteristics, collection and transportation of solid wastes; Air Pollution – types and sources of pollutants, air quality standards; Noise pollution – Impacts and permissible limits, measurement and control of noise pollution.


7. Transportation Engineering: Highway Classification as per IRC; Highway alignment; Engineering Surveys; Geometric Design; Cross sectional elements of road; Gradient; Grade compensation; Traffic Surveys – speed, Volumes, origin and destination; Highway capacity and level of service as per HCM 2000; Intersection – at grade and grade separated; Channelization; Rotary

intersection; signal design – web star method, traffic signs, pavement marking; Parking studies, accidental studies, pavement types, Factors considered for pavement design, flexible and rigid pavements design concepts. Railway Engineering: Permanent way, rails, sleepers, ballast; Creep, coning of the wheel, rail fixtures, and fastenings, super elevation, cant deficiency, curves, turnout; Points and crossings. Airport Engineering: Selection of the site of Airport, runway orientation, and design, the wind rose diagram, basic runway length, correction to basic runway length.

8. Soil Mechanics and Foundation Engineering: Soil Mechanics: Physical properties of soils, Classification and identification, Permeability, Capillarity, Seepage, Compaction, Consolidation, Shear Strength, Earth pressure, Slope stability; Foundation Engineering: Site investigations, stress distribution in soils, Bearing capacity, Settlement Analysis, Types of Foundation, Pile Foundations, Foundations on expansive soils; swelling and its preventions; Cofferdams, Caissons, Dewatering, Bracing for excavations, Newmark charts, machine foundations. Engineering Geology: Mineralogy, Structural Geology, Groundwater Exploration methods; Engineering Geology applications for Tunnels, Dams, and Reservoirs; Geological hazards and preventive measures.


9. Estimation, Costing and Construction Management: Abstract estimate: Detailed estimate – centerline, long & short wall method, various items of Civil Engineering works as per Indian Standard, General Specifications - Earth Work, Brick / Stone Masonry in Cement Mortar, RCC, Plastering in Cement Mortar, Floor finishes, white wash, colour wash; Standard schedule of rates, lead and lift, preparation of lead statement; Computation of earth work – Mid-ordinate, Mean Sectional area, Trepezoidal method, Prismoidal Rule; Approximate estimate – Plinth area and cubic rate estimate.


10. Surveying: Principle and classification of surveying, chain surveying; Compass surveying; Levelling and contouring; Theodolite surveying; curves; Introduction and Fundamental concepts of electronic measuring instruments – EDM, Total station, GIS & GPS.